Yootech Wireless Charger Instructions

1. Power Adapter Requirements

For optimal performance and safety, please use one of the following adapters:

Standard Charging: Certified 5V / 2A adapter
Fast Charging: Certified 9V / 2A Quick Charge (QC) adapter

⚠️ Using an adapter below these specifications (such as 5V/1A) may result in slow charging, unstable performance, or the charger not functioning properly.

2. Power Connection

Connect the USB cable (included in the package) to the charging port on the Yootech wireless charger.
Plug the other end of the cable into your power adapter, then connect the adapter to a wall outlet.
Once powered, the LED indicator will turn green for about 3 seconds, indicating that the charger is properly connected and ready for use.

3. Placing Your Device

Place your Qi-enabled smartphone (or wireless charging-compatible device) directly in the center of the charging pad.
Adjust the position slightly if necessary to find the “sweet spot” where charging begins automatically.
- Some phones have the charging coil positioned slightly off-center; make sure the phone lies flat and stable.
If your phone has a case, ensure it is no thicker than 4mm (0.16 inches) and not made of metal or with magnetic attachments, as these can interfere with charging.

💡 Tip: For consistent charging, avoid placing metal rings, credit cards, or magnetic mounts between the phone and charger.

4. Charging Status and Indicator Light

When charging starts successfully, the LED indicator will light green for 16 seconds and then turn off automatically.
This “light-off” feature is designed to ensure a sleep-friendly environment, especially during nighttime charging.
The charger will continue to power your phone even when the indicator is off.
If the indicator flashes continuously, it may indicate one of the following:
- The phone is not placed correctly on the pad
- A foreign object (metal or magnet) is detected
- The power source is unstable or incompatible

5. Completion and Safety Notes

When your device reaches full charge, the charger will automatically switch to trickle charging mode to prevent overcharging.
Always unplug the charger when it is not in use for long periods.
Keep the charger away from direct sunlight, liquids, and high temperatures.
Clean the surface regularly with a soft dry cloth to maintain optimal performance.

6. Troubleshooting

Issue	Possible Cause	Solution
Phone not charging	Misaligned placement	Reposition phone to center
LED keeps blinking	Metal or magnetic object detected	Remove any metal items
Slow charging	Low-power adapter	Use 9V/2A adapter for fast charge
Overheating	Poor ventilation	Place on a flat, hard surface and keep area clear