Yootech Wireless Charger LED Light Indicators Explained

The LED indicator on the Yootech Wireless Charger provides essential information about the charging status and device condition. By understanding these signals, you can quickly identify whether your device is charging normally or if an issue needs attention.

🔵 Blue Light

Solid blue for 3 seconds, then off → Charger is in standby mode, ready for use.
Solid blue → Device is charging normally.
Flashing blue quickly → Foreign object detected (e.g., metal, coins, cards) on the charging pad.

🟢 Green Light

Slow flashing green → Device detected, but alignment may not be correct.
Fast flashing green → Device not compatible with Qi wireless charging or phone case is too thick/contains metal.
Solid green → On some models, this indicates normal charging.

🔴 Red Light (on certain models only)

Solid red → Error or overheating detected.
Flashing red → Power adapter issue (insufficient power or incompatible adapter).

⚠️ Troubleshooting Tips for LED Issues

Check the power adapter → Use QC 2.0/3.0 (18W or higher) for best results.
Reposition the phone → Place the device directly in the center of the charging pad.
Remove phone cases if they are thick, metallic, or magnetic.
Unplug the charger for 1–2 minutes and reconnect to reset.
Verify device compatibility → Ensure your phone supports Qi wireless charging.

📌 Note

LED light behavior may vary depending on the Yootech model (pad, stand, or dual charger).
Always check the official Yootech user manual for exact LED indicator meanings for your specific model.